The Ozilite Range- Automatic Cigarette Lighter

Product Description
The Ozilite Automatic Cigarette Lighter is a lighting device that has a recessed heating element and no naked flame with the purpose of lighting cigarettes. This device was designed for use in any environment that a naked flame can not exist or where conventional cigarette lighters or matches are not permitted.

Locations
Initially the device was designed for use in maximum-security correctional facilities where cigarettes are allowed, and for security purposes access to lighters and matches are prohibited. However the Ozilite products have proven to be effective in many other environments as well. This device is a flush wall mounted unit; the face plate is made of stainless steel and is liquid proof. There are six security screws (as used in maximum-security correctional facilities) which mount the unit.

Touch Button and Element
The push button on the timer models unit is a non-moving peizo touch switch and the opening is a circular hole 11 millimetres in diameter, making it difficult for most fingers to access the opening. The actual heating element is then recessed a further 6mm under the faceplate. The area between the element and the faceplate is sealed with a silicon o-ring which is heat resistant. The hole below the cigarette lighter opening is for any liquid to run freely out if any liquid should enter the opening.

Heating Cycle ( Timer Models )
The heating cycle of the Ozilite Automatic Cigarette Lighter works once the button is pushed; the element will heat for 10 seconds and then the timer circuit will prevent the re-activation of the element again for another 10 seconds. These times can also be changed to suit your environment.

Voltages
The Ozilite is available in both 110 volt and 240 volt models. We can also supply the Ozilite in 12 and 24 volt versions.